| After-sales Service: | 3 Years Warranty |
|---|---|
| Warranty: | 3 Years |
| Certification: | ISO |
| Splittable: | Splittable |
| Surface Treatment: | Black |
| Material: | Steel |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Q: How to choose barn door track size?
A: Barn door track length should be at least of total door width. For example, if you each barn doors is 60'' wide, you will need 2*60'' = 120'' (10FT) long track, your opening will show a half, you can use the track which is a little bit longer and please let your door a little bigger than the opening.
Q: Can the bypass barn door system let the opening show fully?
A: Yes, you can select a longer track, if each door is 60'' wide, you can choose 15ft track kit
Q: How much ceiling space requirement of the double track bypass system?
A: At least 9" from top of door to ceiling to install.
Q: How much gap of the double track bypass system?
A: This is double track bypass barn door kit, the gap between inner door&wall is about 5/8'' , the gap between two door panels is about 2'' based on door thickness 1-9/16''
Q: How far does the outer door extend from the wall?
A: It is about 6''
About the bearing
About the hanger
Track: 4 pieces 5ft rails, Pre-drilled 16" apart holes on track, make by solid 1/4" thick steel, with 8.8 grade high strengh bearing capacity lag blots, fit for concrete wall and wooden wall
Track connector: With 4 screws to fastening the track, make the installation more convenient and beautiful
Bracket: low ceiling bracket consists of two parts, split design is equal to 2-layer bearing capacity,bring more stable and load-bearing capacity with with 8.8 grade screws
Track spacer: Provide 1-3/8'' length spacer, fit for door thickness less than 1-3/4", if your door thickness less than 2-1/6 ", we also have 1-3/4'' spacer for you to choose from, If your door thickness is greater than 2-1/6'', you can add a headboard on wall, then install the track and bracket
Door stopper: Prevent the door falling off from the track, one door have 2 stoppers, ensure the stability and safety, with the rubber plug, good damping effect and reduce the noise, have 2 screws to fasten stopper on track, you can put stopper on track where you want to stop your door, easy to remove if you want adjust
Floor guide: can prevent the door swinging back and forth or against the baseboard, let your door slide on same locus, fit for all thickness with grooved or ungrooved doors
Anti-jumper: can prevent door to be lifted off rail when the barn door slide, ensure the stability and safety
Q: Can i cut the track?
A: Yes, you can cut it into any length of you want
Q: Can i use it for out door ?
A: We suggest if use for outdoors, you can make some cover above the track, and you need paint and add oil regularly to extended service life
Q: What accessories is required if I want to install more doors?
A: You can buy an extra set of hangers, you can search the product number (B01KH3OH4E) on Amazon.
Q: What circumstances do I need to add a headboard?
A: 1. If you have a doorway trim or your door thickness greater than 2-1/6''; 2. If the studs don't line up with the pre-drilled holes in the rail
Q: How thick door use for it? What is the weight capacity?
A; We suggest 1-3/8" ~ 1-3/4" thick door, if you use for other thick door, please tell us, we will provide some accessories to you; Each track limited 230lbs.
Double track barn door bypass hardware kit package include
4 x 5FT Rail
2 x Track Junction Plate
4 x Steel Hanger with bolt
4 x Door Stopper with Hex Wrench
16 x 1-3/8'' Spacer with lag bolt
8 x Set of Brackets with lag bolt
2 x Floor Guide with screw
4 x Anti-Jumper with screw
1 x Double Track Bypass Barn Door Hardware Installation Manual
Bi folding system:
| Material:Metal,POM | Surface:Rustic Black |
| Fit door thickness: 1-3/8"~1-5/8" | Top door~top roller height :5 5/16" |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}